Posted by: airkayaks | February 6, 2016

Understanding Buoyancy Ratings for a Personal Flotation Device (PFD) Life Vest

We occasionally get questions from customers confused about the buoyancy ratings for life vests.

MTI Adventurewear Canyon PFDs

How can a personal flotation device (PFD) rated at 15.5 lbs, hold up a person of 200 lbs?

While the rating method may seem confusing at first glance, we will explain the math behind it. But first we have a quick guide to understanding the current US Coast Guard regulations on various PFD types and their ratings.

PFD Types

Type I PFD

Type I – Offshore Life Jacket. Designed for extended survival in rough, open or remote water. It has the highest float rating and usually will turn an unconscious person face up. Minimum buoyancy rating 22 lbs. adults, 11 lbs child, 7 lbs infant.

TYpe II PFD

Type II – Near Shore Buoyant Vest. Best use for adults and children in calm inland water where there is chance of fast rescue. Slighly less bulky than Type I vests, and can turn some unconscious people face-up. Minimum buoyancy 15.5 lbs. adults, 11 lbs child, 7 lbs infant.

Stohlquist Spectrum Type III PFD

Type III – Flotation Aid:  For use in calm water by conscious users, where there is good chance of fast rescue. Type III is generally the “paddler’s choice” because they are designed for general boating/water activities as makred on the vest, and are more comfortable.  Minimum buoyancy 15.5 lbs. adults, 11 lbs child, 7 lbs infant.

Type IV Cushion

Type IV – Throwable Device: Boat cushions, rings, and horseshoe buoys. These are for use in calm water where there is good chance of fast rescue. They are not designed to be worn and should be supplemented with a wearable PFD. Varying minimum buoyancy 16.5 to 18 lbs dependent on device.

Stohlquist Descent Type V PFD

Type V – Special Use Device. “Special Use” PFDs include commercial whitewater rafting vests, work vests, deck suits, and hybrid inflatables with restricted use for specific activities as outlined on the vest – be sure to READ the USCG instructions sewn or printed on the device. Varying minimum buoyancy 15 to 22 lbs dependent on device.

Stohlquist Contour Inflatable Waist Pack PFD

Inflatable PFDs: These rely on inflatable chambers that provide buoyancy when inflated by a C02 cylinder. Uninflated, they are less bulky than foam jackets. Please note: these must be regularly inspected and re-armed. Not for non-swimmers or for long hours in rough water. While some are automatic, most of these must be physically inflated, meaning, you need to be cognizant to orally inflate, or pull the inflation cord. Manual inflatable PFDs are not a great choice for situations when you might be hit by something. Varying minimum buoyancy 22 to 33 lbs inflated dependent on device.

How Do We Calculate Weight in Water?

Approximately 80% of the human body is water, thus will not weigh you down (has no weight) in water. Additionally, bodies on average have 15% fat, which is lighter than water. There are other factors that play a part, such as lung size, clothing and whether the water is calm or rough, but those two are the major factors. In general, the more physically fit you are (the less fat on your body), the more buoyancy you will need.

Let’s do the math on a 125 lb and 200 lb person.

125 lbs X 80% water = 100 lbs of water.
125 lbs X 15% fat = 15 lbs of fat.
125 lbs  minus 100 lbs of water minus 15 lbs of fat leaves 10 lbs.

Meaning, a typical 125 lb person weighs 10 lbs in the water. Thus a TYPE III vest rated at minimum 15.5 lbs will be more than adequate. A lean person might have only 10% (12.5 lbs of fat), thus weighing 12.5 lbs in the water. Once again, the TYPE III vest will be fine.

200 lbs X 80% water = 160 lbs of water.
200 lbs X 15% fat = 30 lbs of fat.
200 lbs  minus 160 lbs of water minus 30 lbs of fat leaves 10 lbs.

Meaning, a typical 200 lb person weighs 10 lbs in the water. Thus a TYPE III vest rated at minimum 15.5 lbs will be more than adequate. A lean person might have only 10% (20 lbs of fat), thus weighing an additional 10 lbs in the water and needing a higher buoyancy of 20 lbs.

To check the buoyancy of your PFD in the water, relax your body and let your head tilt back. Make sure your PFD keeps your chin above water and you can breathe easily.

For more info on PFDs, see our Guide to Choosing a Personal Flotation Device (PFD) or visit the website at www.AirKayaks.com.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Categories

%d bloggers like this: