Posted by: airkayaks | February 23, 2020

Product Review: New Deschutes 130 Inflatable Kayak from Aquaglide

Late last summer, we were able to test out several of Aquaglide’s new inflatable kayaks for 2020. We were particularly intrigued with the Deschutes series featuring streamlined hulls that were lightweight, simple and quick to set up.

Aquaglide Deschutes 130 Inflatable kayak

 

This past week, the first of the new products began to arrive. Our previous review was on the Deschutes 110, so our second review will be the Deschutes 130, an open-style, 13-foot inflatable kayak designed for solo paddling. (Please note: some of the information will be repeated from other writeups.)

Getting Started with the Aquaglide Deschutes 130

We unpacked the box and laid out the pieces – inflatable kayak body, backpack, instructions, repair kit, tracking fin, seat, valve adaptor and a plastic splash guard. The repair kit features generous-sized repair patches, a valve wrench and glue. Initial impression – the kayak is nicely presented and packaged with bubble wrap protecting valves, handles, etc.

What's inside the Deschutes box

The kayak body weighs approximately 22 lbs with the seat adding another 2 lbs. The kayak with seat and fin – all in the backpack – weighs 27.5 lbs, with a folded size of 27 x 16 x 10 inches for the body only. Backpack size is roughly 27 x 22 x 18 inches, which can be cinched down. All boxed up, the dimensions are 31 x 18 x 16 inches with a shipping weight of 36 lbs. We were able to get everything – plus a pump and paddle – into the pack.

(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded.)

The Deschutes 130 comes with an instruction manual, but as mentioned in our Deschutes 110 writeup, the instructions are pretty sketchy for new users. This is compounded by the manual layout in which each section is first written in English, then up-to 17 different languages (including Bulgarian and Estonian), before you get to the next English section. The inflation instructions start on page 16.

Unrolling the kayak

Set up is straight-forward and simple – unpack, unfold, inflate.

The instructions say to put the valve in the closed position and to pump up the sides to 3 PSI, but there are no details explaining this in the instructions.

Closing the valve

If you are unfamiliar with military-style valves, they are simple to use – with your finger, twist the plunger slightly up to the “closed” position to inflate (air goes in but doesn’t come back out) and “down” to deflate or open (air comes out).

Military valve adaptor and Boston valve adaptor

The Deschutes 130 military valves require a special adaptor, which is found in the repair kit. The Aquaglide military adaptor couples to the valve with a Boston valve adaptor; this is a common fitting, slightly conical and about 1/2 inch thick. Friction fit the adaptor onto the Boston valve fitting, then attach the fitting to the military valve with a slight twist. It is helpful to use a pump with pressure gauge to ensure the kayak is inflated appropriately.

Pumping up the main chamber

We closed the valve, attached the pump and began to inflate. It took 46 strokes with a double-action hand pump to reach 3 PSI on one side.

AirKayaks Note: The military valve adaptor has a bar across the inside, which pushes open the spring valve, allowing pressure gauges to take a reading. While this is great when working correctly, if you haven’t securely coupled the military adaptor to the Boston valve fitting, the hose can blow off, allowing all the air to escape. If you experience this, recouple the adaptors, pressing on tightly, and make sure you do not pull on the hose to remove the fitting, but twist off the adaptor from the valve. This can also be rectified by gluing the adaptor onto the Boston valve fitting, or roughing up the BV fitting surface so there is “more grab.”

Pumping up the second chamber

We then inflated the second main tube, which also took 46 pumps.

As a side note, if you read our previous writeup on the Deschutes 110, we used the Kokopelli Feather pump to inflate the second chamber in 40 seconds, with a subsequent 10 further pumps with the double action hand pump. The feather pump is a very small (fits in your palm), rechargeable 12-volt battery that can inflate and deflate – we highly recommend it. See our detailed review on the Feather pump.

Pumping up the thwart

We then inflated the third chamber – the thwart – to 2.5 PSI with a quick 5 pumps.

Installing the seat

Next attach the seat – this stays in position utilizing velcro strips on the floor and adjustable side straps. There is one set of d-rings just before the side handles. The seat features clips that quickly connect to the d-rings, which then can be adjusted tighter for firmer support.

AirKayaks note: The instructions have a misprint – or rather a missing word – on the seat position. It should say for solo paddling, the seat should be placed just rear of center for best boat balance. But, this is somewhat of a moot point due to the location of the fixed thwart.

Attaching the seat straps

Position the seat forward a few inches from the thwart and attach the clips. If you’re taller, you might want to position the seat all the way back against the thwart.

Deck riser insert

Now install the unmarked plastic splash guard – which is not mentioned in the instructions. This is meant to stiffen the front visor.

Installing the deck riser

You will notice there is a velcroed flap on the underside of the visor – pull this open, and insert each side of the plastic strip into the two side pockets, then refasten the velcro, securing the strip.

Removable quick release tracking fin

The last step is to attach the removable tracking fin, which enhances paddling/tracking in deeper water.

Installing the tracking fin

Make sure the fin is pointing towards the rear of the kayak, then insert the front of the fin into the groove, pushing down and back, until the hole in the fin plate lines up with the hole in the fin.

Installing the tracking fin

Push the quick-release fin pin (attached to the fin by a cord) through the hole to secure the fin. Pull up on the fin to make sure you have it locked in position.

As a last check, make sure the drain plug – located inside the back well of the kayak, is screwed in tightly, otherwise water will seep in.

Lightweight and easy to carry

That’s it! Quick and easy, just over 5 minutes and you’re ready to paddle.

Features and Specifications on the Aquaglide Deschutes 130 Inflatable Kayak

The Deschutes 130 is constructed with four molded carrying handles (bow, stern and both sides), but can very easily be carried by hooking the side of the kayak over your shoulder. The side handles are located roughly 81 inches from the kayak snout.

Beefed-up nose cones

The bow and stern of the kayak feature beefed-up nose cones.

Front deck lacing

Two splash decks – front and rear – extend partly over the seating well and help prevent water from splashing in. Each has a bungee deck-lacing system for attaching gear. The front deck extends 35 inches over the seating well. The bungee system features 10 soft cloth loops with deck-lacing approximately 23 inches long by 14 inches wide tapering to 3 inches.

Open cockpit design

The front splash deck features a 5 inch splash guard to help prevent water coming over the deck. There is one more cloth d-ring centered on the bow deck, which can be used to attach gear.

Rear bungee deck lacing

The rear deck extends 29 inches, with 8 soft cloth loops, a bungee system measuring 13 inches by 14 to 4 inches, and another centered cloth loop.

Side clips

There are two plastic d-rings (one each side) just forward of the side handles, and are used to attach the seat and possibly gear; these are positioned 76 inches from the nose.

Military valves

There are three military valves for the two side chambers and the thwart.

Padded seat with breathable mesh covering

The Deschutes series features a modified Core 2 seat – basically a stripped-down cross between Aquaglide’s Pro-formance seat (found in the Chelans) and the Core seat (found on the Chinooks). The new Core 2 has a padded, mesh-covered back for breathability, and a padded seat base. There are two side straps with quick-connect clips and adjustable strap lengths. The seat base is 15 x 15.5 inches with two inches of padding. The seat back is 13 inches tall with a 26″ wrap-around back, 1 inch thick. Two velcro strips on the floor and seat base keep the seat from slipping out of position. There are no storage options on the seat back, but possibly one could connect something to the seat buckles. The side straps can be adjusted about 6 inches forward of the thwart, based on the d-ring positions.

Integrated thwart stiffening bar

The floor in the seating area is constructed from a 1/2 inch grooved, closed-cell EVA foam which is laminated/adhered to the hull; it is not removable or inflatable. The narrow grooves create some grip when entering the kayak, as well as letting small amounts of water to run down the gunnels.

A rigid thwart bar is located on the floor, and could be used as a foot brace – if your legs are long enough. The thwart bar, thwart and laminated EVA foam (termed the Feather Frame) work together to create a lightweight, simple-to-set-up hull that can be easily rolled up, yet still provides a fair amount of rigidity.

Integrated inflatable thwart

An 8-inch diameter inflatable thwart is permanently fixed between the two side chambers. It is positioned 94 inches from the kayak nose and 54 inches from the tail.

Deep inside the rear well is one floor drain plug (not to be confused with self-bailing) which can be unscrewed/opened to let water out.

The backpack is quite roomy. Two-way zippers run along three sides, allowing the pack to be completely opened for easy access and stowage. Top, side and rear carrying handles provide a myriad of handling options, as well as two padded, adjustable backpack shoulder straps. A drawstring mesh pocket, approximately 14 x 18 inches deep, is perfect for storing a hand pump. Two adjustable cinch straps allow one to tighten the pack. Pack measurements are approximately 28 inches wide x 15 inches deep x 26 inches tall.

Rugged Duratex exterior

The kayak body features tubeless, welded, side chambers constructed from 1000 denier 850 GSM Duratex reinforced PVC with a smooth finish.

Rugged hull

The hull is a rugged, puncture-resistant 500 denier 600G Duratex reinforced PVC with removable tracking fin and 16-inch landing plate.

Removable Quick Release Tracking Fin

The tracking fin is hefty, measuring 5 x 11 inches with a quick-release locking pin.

Aquaglide Deschutes 130 Inflatable kayak

We did measurement tests. The kayak inflated is 13 feet long from end cap to end cap, and approximately 39 inches wide. The side bladders are roughly 10 inches in diameter, making the sides roughly 10 inches above the seating area.

Interior dimensions are approximately 130 inches long by approximately 19 inches at the widest point.

Rear storage well

The fixed thwart creates a rear well that is 52 inches long, roughly 19 inches wide tapering down to nothing; 26 inches behind the thwart is open, with the covered area about 7.5 inches deep in headroom.

Aquaglide 130 birds-eye view.

Dependent on where the seat is positioned (we put it a couple inches from the thwart), there is roughly 85 inches from the front seat back to the interior snout (33 inches of this is covered deck) or 44 inches to the front “floor bar”, with 39 inches from the bar to the interior snout (this could be used for storage). Seat back to the rear deck lacing is 37 inches while seat back to the front deck lacing area is 57 inches.

Weight limitation is 400 lbs for person and gear.

Aquaglide Deschutes 130 on the water

We took the Deschutes 130 out for a spin a couple of times.

Aquaglide Deschutes 130 Inflatable kayak - on the water

The first time was in slightly choppy water. As the kayak beam at 39 inches is pretty wide, we used a 240cm paddle rather than our standard 230cm. At my height of 5′ 4″, the kayak felt pretty rugged, solid and rode over the waves well. The kayak had good glide, was maneuverable and zippy, though slightly “drifty” in the snout; possibly weight would even this out.

I was not able to reach the thwart bar to use as a foot brace as it would have positioned me too far forward. I definitely could see the ability to bring a small child, dependent on your size, more towards the front deck.

The seat was comfortable and provided good support, but it is to be noted there are no storage options on the seat back. There are minimal d-rings on the kayak itself and both the front and rear bungee systems are quite far from the paddler, so slightly inconvenient to access. One option would be to run a strap around/under the thwart to attach gear. This would also be a good candidate for some aftermarket d-rings, which are pretty easy to install. See our article on Attaching D-rings to an Aquaglide SUP for details.

Rear storage well

Besides providing more storage area, the open rear well could easily fit a small person or large dog; the Duratex material is rugged enough to deflect claws. For reference – while certainly not the most comfortable position – I was able to fit behind the seat.

Stable

While the floor felt slightly “ripple-y” when getting into the kayak, once on the water it felt surprisingly rigid – in fact, I was able to stand up despite the fact there was not a high-pressure floor, in fact no inflatable floor at all!

Aquaglide Deschutes 130 Inflatable kayak - on the water

My 6’2″ husband then took the Deschutes out for a spin – and was thoroughly impressed! The open cockpit allowed him to easily get in and out without feeling cramped, and he found it to paddle very well without experiencing the “drift.” With his knees slightly bent, he was able to utilize the floor bar as a foot rest. As he was using a 240cm paddle, he did not notice the width as being a problem. He did wish it had paddle holders.

One thing to note – the decks dip slightly, which can allow water to pool. While I did not notice water coming into the kayak, if this becomes an issue, a pool noodle underneath – or a pack – would lift the deck allowing water to run off.

Easy to roll up

Last of all, the kayak is very easy to fold up, simply fold it in half (or bring the sides into each other) and roll it up.The bag is spacious enough to carry the seat, a pump and paddle, and opens wide enough to easily get the kayak back into the pack.

Bottom line on the AquaGlide Deschutes 130

Aquaglide Deschutes 130 Inflatable kayak - on the water

If you’re looking for a no-fuss, easy-to set up and quick-to-breakdown, lightweight, recreational kayak – look no further. It’s a minimalist that paddles very will, is maneuverable and really shines when it comes to room for a larger paddler, lots of gear or a small friend – or all three!

Lightweight and easy to carry

With a “tubeless” construction, the kayak is lighter than those with removable bladders, and less likely to have twisting problems during setup. There are no neoprene knuckleguards or paddleholders, but the Duratex smooth skin is less abrasive to touch.

The two deck lacing systems can be used to carry a fair amount of gear, as well as the two “under the deck” open areas. While the storage areas are fairly far from the paddler, gear could be attached to a strap wrapped around the thwart. The addition of after-market d-rings is a fairly simple process and would really enhance the kayak.

Easy to get into

The open cockpit design will appeal to those who are uncomfortable being enclosed, paddlers who need easy entry and exit (such as seniors or those with physical limitations), or those in need of a quick dip on a hot summer day.

The laminated floor and integrated thwart provide rigidity, without the added time time or expense of an inflatable floor.

The tracking fin increases the handling performance. It’s a good choice for slow-moving rivers, lakes and coastal kayaking, or for some surf or light whitewater – probably through Class II.

Easily fits in the trunk of a small car.

Breakdown is just as simple. Drying time is improved by the Duratex smooth-skin, as well as the fact there are minimal areas for water to hide. It rolls up quickly and surprisingly well, easily fitting into the trunk of a small car, an RV or an option for vacation travel.

Aquaglide Deschutes 130 Inflatable kayak - on the water

Street price is $699.99. For more details or to purchase, visit the AquaGlide Deschutes 130 product page at AirKayaks.com.

The Deschutes comes in two other sizes.

Aquaglide Deschutes 110 Inflatable Kayak on the Water

Smaller paddlers, or those needing less space, may want to take a look at the Deschutes 110. With a 11 foot waterline and, 37.5″ width, the Deschutes 110 is capable of carrying 300 lbs. See our detailed writeup on the Aquaglide Deschutes 110. MSRP is $599.99

Aquaglide Deschutes 145 inflatable tandem kayak

The Deschutes 145 is set up for tandem paddling, with a 14.5 foot length, 40 inch width and a capacity of 600 lbs. MSRP is $799.99. See our detailed writeup on the Aquaglide Deschutes 145.

More questions? Feel free to contact us or give us a call at 707-998-0135. You can also watch two videos below on the Aquaglide Deschutes 130:


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Categories

%d bloggers like this: